Search results for 'switches'
-
Mayhem 18" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Chrome 18" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Chrome Apehangers
18" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Triple plated chrome!
18" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn More
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 18" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 18" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
18" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
18" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 17" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 17" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
17" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
17" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 16" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Chrome 16" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Chrome Apehangers
16" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Triple plated chrome!
16" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 16" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 16" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
16" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
16" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 15" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Chrome 15" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Chrome Apehangers
15" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Triple plated chrome!
15" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 15" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 15" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
15" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
15" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 14" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Chrome 14" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Chrome Apehangers
14" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Triple plated chrome!
14" rise. 8" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1-1/4" inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are 1" inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 14" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 14" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
14" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
14" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 13" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 13" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
13" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
13" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 12" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Chrome 12" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Chrome Apehangers
12" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Triple plated chrome!
12" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 12" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 12" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
12" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
12" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 11" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Chrome 11" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Chrome Apehangers
11" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Triple plated chrome!
11" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 11" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 11" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
11" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
11" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 10" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Chrome 10" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Chrome Apehangers
10" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Triple plated chrome!
10" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Mayhem 10" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"Mayhem" Black 10" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "Mayhem" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Mayhem" Black Apehangers
10" Rise 1-1/4" HandlebarsIMPORTANT: Unlike the cheap bars that our competitors sell we do not use pipe-in-pipe construction. Welded or glued joints on cheap handlebars tend to fail and handlebars simply fall apart collapse during a ride. Imagine what that catastrophic failure leads to.
Our handlebars use one piece technology. There are no joints in 1" to 1.25" transitions. Solid one piece pipe will not fail!
Powdercoated semi-gloss black!
10" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
35" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo 16" Black Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$575.00"El Diablo" Black 16" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"El Diablo" Black Apehangers
16" Rise 1-1/4" Handlebars
Powdercoated flat black!
16" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
.jpg)
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo 16" Black Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"El Diablo" Black 16" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"El Diablo" Black Apehangers
16" Rise 1-1/4" Handlebars
Powdercoated flat black!
16" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo 14" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99Chrome 14" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Chrome 'El Diablo' Apehangers
14" Rise 1-1/4" Handlebars
Show chromed!
14" rise. 8" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Product ID = 1319
Learn More -
El Diablo 14" Black Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$549.99"El Diablo" Black 14" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"El Diablo" Black Apehangers
14" Rise 1-1/4" Handlebars
Powdercoated flat black!
14" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo 14" Black Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$499.99"El Diablo" Black 14" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"El Diablo" Black Apehangers
14" Rise 1-1/4" Handlebars
Powdercoated flat black!
14" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo 13" Chrome Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99Chrome 13" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Chrome 'El Diablo' Apehangers
13" Rise 1-1/4" Handlebars
Show chromed!
13" rise. 8" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn More -
El Diablo 10" Black Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$449.99"El Diablo" Black 10" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"El Diablo" Black Apehangers
10" Rise 1-1/4" Handlebars
Powdercoated flat black!
10" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo 10" Black Ape Hangers 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$449.99"El Diablo" Black 10" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"El Diablo" Black Apehangers
10" Rise 1-1/4" Handlebars
Powdercoated flat black!
10" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn More -
Chromed out Kit El Diablo 18" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson
$488.88CHROME OUT KIT "El Diablo"
CHROME 18" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
Chrome Switches, Chrome Grips and Chrome MirrorsThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
Here is what you are getting:
Chrome Smooth-Contour Hand Controls
Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
9/16" Bore master cylinder. For Single disc application
(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.Retail $402.99
----------------------------------------------------------------
"El Diablo" Chrome Apehangers
18" Rise 1-1/4" HandlebarsTriple Plated Chrome!
18" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.Retail $210.99
--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.Retail $206.99
--------------------------------------------------------------
Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips
Retail $99.99
--------------------------------------------------------------
Chrome Custom Tear Drop Mirrors convex mirrors
Retail $249.99
---------------------------------------------------------------
Total package price:
402.99
210.99
206.99
99.99
249.99_________________
Total: $1405.95
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Chrome Switches and Wire Harness for Harley Hand Controls 1996-2006
$64.00Chrome Switches and Wire Harness
for Harley-DavidsonHigh quality chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.Overall length 48"
Will fit all 1996-2006 Harley-Davidson Big Twins models
and Custom application.
Learn More
-
Chrome Switches and Wire Harness for 2007-10 Harley-Davidson Hand Controls
$99.99Chrome Switches and Wire Harness
for Harley-DavidsonHigh quality chrome switches for hand controls.
Wires are soldered and O.E.M. color-coded for easy installation.Overall length 48"
Will fit all 2007-10 Harley-Davidson XL Sportster and Big Twin models
and Custom application.
Learn More
-
Chrome out Kit El Diablo 16" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson
$488.88CHROME OUT KIT "El Diablo"
CHROME 16" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
Chrome Switches, Chrome Grips and Chrome MirrorsThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
Here is what you are getting:
Chrome Smooth-Contour Hand Controls
Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
9/16" Bore master cylinder. For Single disc application
(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.Retail $402.99
----------------------------------------------------------------
"El Diablo" Chrome Apehangers
16" Rise 1-1/4" HandlebarsTriple Plated Chrome!
16" rise. 8" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.Retail $210.99
--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.Retail $206.99
--------------------------------------------------------------
Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips
Retail $99.99
--------------------------------------------------------------
Chrome Custom Tear Drop Mirrors convex mirrors
Retail $249.99
---------------------------------------------------------------
Total package price:
402.99
210.99
206.99
99.99
249.99_________________
Total: $1405.95
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1-1/4" inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are 1" inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Chrome out Kit El Diablo 14" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson
$488.88CHROME OUT KIT "El Diablo"
CHROME 14" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
Chrome Switches, Chrome Grips and Chrome MirrorsThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
Here is what you are getting:
Chrome Smooth-Contour Hand Controls
Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
9/16" Bore master cylinder. For Single disc application
(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.Retail $402.99
----------------------------------------------------------------
"El Diablo" Chrome Apehangers
14" Rise 1-1/4" HandlebarsTriple Plated Chrome!
14" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.Retail $210.99
--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.Retail $206.99
--------------------------------------------------------------
Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips
Retail $99.99
--------------------------------------------------------------
Chrome Custom Tear Drop Mirrors convex mirrors
Retail $249.99
---------------------------------------------------------------
Total package price:
402.99
210.99
206.99
99.99
249.99_________________
Total: $1405.95
Learn More -
Chrome out Kit El Diablo 12" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson
$488.88CHROME OUT KIT "El Diablo"
CHROME 12" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
Chrome Switches, Chrome Grips and Chrome MirrorsThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
Here is what you are getting:
Chrome Smooth-Contour Hand Controls
Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
9/16" Bore master cylinder. For Single disc application
(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.Retail $402.99
----------------------------------------------------------------
"El Diablo" Chrome Apehangers
12" Rise 1-1/4" HandlebarsTriple Plated Chrome!
12" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.Retail $210.99
--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.Retail $206.99
--------------------------------------------------------------
Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips
Retail $99.99
--------------------------------------------------------------
Chrome Custom Tear Drop Mirrors convex mirrors
Retail $249.99
---------------------------------------------------------------
Total package price:
402.99
210.99
206.99
99.99
249.99_________________
Total: $1405.95
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Chrome out Kit El Diablo 10" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson
$488.88CHROME OUT KIT "El Diablo"
CHROME 10" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
Chrome Switches, Chrome Grips and Chrome MirrorsThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
Here is what you are getting:
Chrome Smooth-Contour Hand Controls
Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
9/16" Bore master cylinder. For Single disc application
(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.Retail $402.99
----------------------------------------------------------------
"El Diablo" Chrome Apehangers
10" Rise 1-1/4" HandlebarsTriple Plated Chrome!
10" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.Retail $210.99
--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.Retail $206.99
--------------------------------------------------------------
Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips
Retail $99.99
--------------------------------------------------------------
Chrome Custom Tear Drop Mirrors convex mirrors
Retail $249.99
---------------------------------------------------------------
Total package price:
402.99
210.99
206.99
99.99
249.99_________________
Total: $1405.95
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Chrome Hand Controls and Switches for Harley-Davidson FLT 1996-2008
$249.99Chrome Hand Control Kit
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THEN ANY HD PRODUCT.Will fit all 1996--2008 Harley-Davidson FLT models.
Switch housings with Cruise Control and Radio Control.11/16" Bore master cylinder.This is top quality kit.
Complete Kit Includes: Ergonomic clutch and brake levers, master cylinder, switch housings,switches,wires,
brackets,wire diagram and hardware.
Learn More
-
Chrome Hand Controls and Switches for Harley-Davidson FLT 1996-2008
$244.44Chrome Hand Control Kit
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THEN ANY HD PRODUCT.Will fit all 1996--2008 Harley-Davidson FLT models.
Switch housings with Cruise Control and Radio Control.11/16" Bore master cylinder.This is top quality kit.
Complete Kit Includes: Ergonomic clutch and brake levers, master cylinder, switch housings,switches,wires,
brackets,wire diagram and hardware.
Learn More -
Black Switches and Wire Harness for Harley 1996-06 Hand Controls
$69.99Switches and Wire Harness
for Harley-DavidsonHigh quality black switches for hand controls.
Wires are soldered and color-coded for easy installation.with clutch safety neutral switch
Will fit all 1996-2006 Harley-Davidson models
and Custom application.
Learn More
-
Black Hand Controls and Switches for Harley-Davidson FLT 1996-2008
$269.99Black Hand Control Kit
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND BLACK FINISH THEN ANY HD PRODUCT.Will fit all 1996--2008 Harley-Davidson FLT models.
Switch housings with Cruise Control and Radio Control.11/16" Bore master cylinder.This is top quality kit.
Complete Kit Includes: Ergonomic clutch and brake levers, master cylinder, switch housings,switches,wires,
brackets,wire diagram and hardware.Learn More -
Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 8" Rise with Hand Controls + Switches for Harley-Davidson
$399.99Black 8" Rise T-Bars with Built-In LED Turn Signals
with Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK POWDER COATED 8" Rise 1-1/4" T-Bars with Built-In L.E.D. Turn Signals
Demon's Cycle Inc. design. Available only from Demon's
Flat Black powdercoated!
8" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $499.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
499.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1344.97--
Learn More
-
Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 6" Rise with Hand Controls + Switches for Harley-Davidson
$399.99Black 6" Rise T-Bars with Built-In LED Turn Signals
with Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK POWDER COATED 6" Rise 1-1/4" T-Bars with Built-In L.E.D. Turn Signals
Demon's Cycle Inc. design. Available only from Demon's
Flat Black powdercoated!
6" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $499.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
499.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1344.97--
Learn More -
Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 10" Rise with Hand Controls + Switches for Harley-Davidson
$299.99Black 10" Rise T-Bars with Built-In LED Turn Signals
with Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK POWDER COATED 10" Rise 1-1/4" T-Bars with Built-In L.E.D. Turn Signals
Demon's Cycle Inc. design. Available only from Demon's
Flat Black powdercoated!
10" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $499.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
499.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1344.97--
Learn More -
Black 1-1/4" Handlebars T-Bars 10" Rise with Hand Controls + Switches for Harley-Davidson
$399.99BLACK 10" Rise T-Bars
with Chrome Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK 10" Rise 1-1/4" T-Bars
Powder coated black!
10" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--
Learn More
-
Black 1-1/4" Handlebars Pullback T-Bars 8" Rise with Hand Controls + Switches for Harley-Davidson
$399.99BLACK 8" Rise T-Bars
with Chrome Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK 8" Rise 1-1/4" T-Bars
Powder coated black!
8" rise. 3 1/2" Pullback. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--
Learn More
-
Black 1-1/4" Handlebars Pullback T-Bars 6" Rise with Hand Controls + Switches for Harley-Davidson
$399.99BLACK 6" Rise T-Bars
with Chrome Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK 6" Rise 1-1/4" T-Bars
Powder coated black!
6" rise. 3 1/2" Pullback. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--Learn More
-
Black 1-1/4" Handlebars Pullback T-Bars 10" Rise with Hand Controls + Switches for Harley-Davidson
$399.99BLACK 10" Rise T-Bars
with Chrome Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK 10" Rise 1-1/4" T-Bars
Powder coated black!
10" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--Learn More
-
Black 1-1/4" Handlebars "T-Bars" 8" Rise with Hand Controls + Switches for Harley-Davidson
$399.99BLACK 8" Rise T-Bars
with Chrome Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. Hanflebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK 8" Rise 1-1/4" T-Bars
Powder coated black!
8" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--
Learn More -
9" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson
$274.99Chrome 9" Rise Ape Hangers
Internally Wired with Chrome SwitchesThis listing is for 1-1/4" handlebar set-up. All components are top quality parts, featuring hidden mounting wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come professionally assembled, ready to be installed on your motorcycle in minutes.
We did all the hard and tricky work so you can easily install your existing switch housings in minutes or use custom hand controls of your choice.
Here is what you are getting:
Chrome Apehangers
9" Rise 1-1/4" Handlebars
Show Chrome!
9" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price:
210.99
206.99
Professional Installation 235.00
_________________
Total: $652.98
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1-1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
8" Black Z-Bars1-1/4" Diameter with Black Switches for Harley-Davidson
$225.00"Z- Bars" Black 8" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
"Z-Bars" Black Apehangers
8" Rise 1-1/4" Handlebars
Powdercoated flat black!
8" rise. 3" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1-1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
8" Black Z-Bars 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson
$499.99"Z- Bars" Black 8" Rise Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"Z-Bars" Black Apehangers
8" Rise 1-1/4" Handlebars
Powdercoated flat black!
8" rise. 3" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality USA made Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
18" Rise Black Frisco Chubby's Ape Hangers 1-1/4" Diameter Handlebars with Hand Controls and Switches Harley Motorcycles
$399.99Black 18" Rise Frisco Chubby Ape Hangers
with Smooth-Contour Control Kit
and Black SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are black powder coated top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Black Frisco Chubby Apehangers
18" Rise 1-1/4" Handlebars
Black powder coated!
18" rise. 6" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality Black switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
18" Rise Black Frisco Chubby's Ape Hangers 1-1/4" Diameter Handlebars with Hand Controls and Switches Harley Motorcycles
$399.99Black 18" Rise Frisco Chubby Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are pblack powder coated or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Black Frisco Chubby Apehangers
16" Rise 1-1/4" Handlebars
Black powder coated!
16" rise. 6" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1-1/4" inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are 1" inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
