Search results for 'hangers'

Chrome 14" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Black Switches

For Harley-Davidson Touring (Dresser / Bagger) models W/ Radio Control from 1996 to 2007

May work on throttle-by-wire models with custom fitting and any custom application

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and black switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Black Switches and Wire Harness

High quality black switches for Dresser hand controls with radio control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 10" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 10" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 12" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4" inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 18" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 16" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 15" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4" inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 10" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 11" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 12" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 13" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 14" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 15" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 16" Rise 'El Diablo' Ape Hangers with Smooth-Contour Control Kit Will fit all single disc 1996-2010 Harley-Davidson models. 9/16" Bore master cylinder. Learn More

Chrome 17" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4" inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 18" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 11" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4" inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 17" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4 inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 11" Rise 'Mayhem' Ape Hangers
with Chrome Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models With Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are tiplr plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality Black switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

Learn More

Chrome 13" Rise 'Mayhem' Ape Hangers
with Chrome Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models With Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are tiplr plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality Black switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

Learn More

Chrome 14" Rise 'Mayhem' Ape Hangers
with Chrome Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models With Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality Black switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

Learn More

Chrome 18" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with just CRUISE and RADIO)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 16" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2007

May work on throttle-by-wire models with custom fitting and any custom application

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 12" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2007

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4-inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 15" Rise Ape Hangers

with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Chrome Apehangers
15" Rise 1-1/4" Handlebars

Show chromed!
15" rise. 8.5" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

XXX Star Nicki Hunter

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4" inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 16" Rise Ape Hangers

with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Chrome Apehangers
16" Rise 1-1/4" Handlebars

Show chromed!
16" rise. 8.5" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

XXX Star Nicki Hunter

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4" inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 17" Rise Ape Hangers

with Smooth-Contour Control Kit
and Chrome Switches

This auction is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Chrome Apehangers
17" Rise 1-1/4" Handlebars

Show chromed!
17" rise. 8.5" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
33" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

XXX Star Nicki Hunter

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

CHROME APEHANGERS
14" Rise 1-1/4" Handlebars

To fit Harley-Davidson motorcycles and custom application.

Show chromed!
14" rise. 8.5" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip.
Bars are dimpled for late control wiring.
Come with drilled wiring holes.

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4" inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Black 14" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches W/ Cruise Crontrol

For Harley-Davidson Touring (Dresser / Bagger) models with Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4"-inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Black 16" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with RADIO and CRUISE ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality chrome switches for Dresser hand controls with radio control and  cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4"-inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Black 18" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with RADIO and CRUISE ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4-inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 15" Rise 'Mayhem' Ape Hangers
with Chrome Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models With Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are tiplr plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality Black switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

Learn More

Chrome 17" Rise 'Mayhem' Ape Hangers
with Chrome Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models With Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality Black switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

Learn More

Chrome 16" Rise 'Mayhem' Ape Hangers
with Chrome Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models With Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are tiplr plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality Black switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

Learn More

Chrome 12" Rise 'Mayhem' Ape Hangers
with Chrome Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models With Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are tiplr plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality Black switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

Learn More

Chrome 9" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit

This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

---------------------------------------------------------------

Total package price: 402.99
210.99
_________________
Total: $613.98

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Black 12" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches

For Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4-inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Black 13" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches W/ Cruise Crontrol

For Harley-Davidson Touring (Dresser / Bagger) models with Cruise Control from 1996 to 2012

May work on throttle-by-wire models with custom fitting and any custom application

(Only for models with CRUISE and RADIO ONLY)

This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4"-inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Black 14" Rise 'El Diablo' Ape Hangers with Black Hand Control Kit and Black Switches For Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2012 All components are brand new and have been assembled by professional Harley-Davidson certified mechanic. Learn More

Chrome 12" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This auction is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THEN ANY HD PRODUCT.

This is top quality kit.
Much higher quality then HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Chrome Apehangers
12" Rise 1-1/4" Handlebars

Show chromed!
12" rise. 10" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

XXX Star Nicki Hunter

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 18" Rise Ape Hangers
with Hand Control Kit

This auction is for 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts.

All components are brand new.

Here is what you are getting:

Smooth-Contour Hand Controls
BETTER LOOK AND CHROME THEN ANY HD PRODUCT.

This is top quality kit.
Much higher quality then HD or any aftermarket product. Simply the best.

Retail $402.99

----------------------------------------------------------------

Chrome Apehangers
18" Rise 1-1/4" Handlebars

Show chromed!
18" rise. 8.5" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.

Retail $210.99

--------------------------------------------------------------

XXX Star Nicki Hunter

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 18" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This auction is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Chrome Apehangers
18" Rise 1-1/4" Handlebars

Show chromed!
18" rise. 8.5" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

XXX Star Nicki Hunter

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Chrome 11" Rise Ape Hangers

with Smooth-Contour Control Kit
and Chrome Switches

This auction is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Chrome Apehangers
10" Rise 1-1/4" Handlebars

Show chromed!
11" rise. 10" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
34" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

XXX Star Nicki Hunter

 

Product ID = 2553

Learn More

Black 10" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Black Apehangers
10" Rise 1-1/4" Handlebars

Powdercoated flat black!
10" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

Black 17" Rise Ape Hangers

with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Black Apehangers
17" Rise 1-1/4" Handlebars

Powdercoated flat black!
17" rise. 8.5" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.

Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

Learn More

Black 12" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome Switches

This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

Here is what you are getting:

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

Black Apehangers
12" Rise 1-1/4" Handlebars

Powdercoated flat black!
12" rise. 9" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99

---------------------------------------------------------------

Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97

 

 

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" nch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1-1/4" inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers were used to mount the new bars. 7. Because the bars are 1" inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More