Black Parts
Harley-Davidson Nightster and Night Train are famous for the all black stealth look. We offer a choice of custom motorcycle parts in black for custom Harleys, choppers and bobber projects. Our handlebars, Harley wheels, engines, transmissions, starters, billet air cleaners and side mount license plates come in variety of black finishes: flat black, gloss, wrinkle, powdercoated and anodized. Some of the Harley forward controls, grips and headlights are manufactured exclusively for Demon's Cycle and available only from us.
-
21x3" Black Mammoth 48 Fat Spokes Front Wheel for Harley-Davidson Single Disc
$474.9921" x 3" Black 48 Fat Spokes Front Wheel
BLACK with BILLET HUB
MAMMOTH 48 SMOOTH SPOKES
To fit any Harley-Davidson Single Disc models and custom application21" x 3" Single disc front for 3/4" axle or 1" axle (second set of bearings and spacer are included)This is the best spoked wheel you can get. The craftsmanship and quality are surpassed by none. The thick spokes are chromed, Billet hub and rim are powder coated black.Wheel comes with black billet hub and sealed bearings, sealed for TUBELESS applicationSets available
Learn More
-
Bobber Solo Seat for Harley-Davidson or Indian Black Laced Leather With Skirt
$189.00Custom Hand-Made Show Quality
Black Bobber Solo Leather Seat with SkirtDemon's Cycle brandThis is not your average motorcycle seat. This show piece is hand crafted from the scratch to satisfy the most demanding bike builders.
The construction starts with 1/4" thick T-6 6061 Billet plate that forms incredibly sturdy and rust proof seat pan. The seat pan is high polished and riveted.The seat is covered with the top quality, thick genuine leather. Hand tooled and laced.Quality of this seat is second to none. No shortcuts were taken in the manufacturing process.Polished mounting hardware is included.Seat measures: 16" long. 12" wide. 7" rear mounts distance. Front mount is adjustable.
Solo seat by La Rosa on Harley-Davidson
Learn More
Solo seat by La Rosa on Harley-Davidson -
Black 1.75 Kw Heavy Duty Starter for Harley-Davidson 2007 and later Big Twins
$184.99Fully Powder Coated
Thunder Fire
Heavy Duty StarterThunder Fire is setting the standard in starter performance with the new Heavy Duty series for 2007 and later model Big Twins. This starter is built with all new tooling and all parts are new not remanufactured like some of the competitors. Improvements are made to the key components to insure long life and exceptional performance.
1.75 KW SERIES
Great upgrade for stock and 1.4 Kw starters
Made for trouble-free starting of most strokers
Fits some stock applications on Big Twins where 3/4" longer body is not a problem.
Includes manual push button cap on solenoid
(push-button alone retails for $150)
Works with OEM battery
Individually tested with data sheet included.
Learn More
-
16" Bobber Solo Seat for Harley-Davidson or Indian Black Laced Leather
$139.99Custom Hand-Made Show Quality
Bobber Solo SeatThis is not your average motorcycle seat. This show piece is hand crafted from the scratch to satisfy the most demanding bike builders.
The construction starts with 1/4" thick T-6 6061 Billet plate that forms incredibly sturdy and rust proof seat pan. The seat pan is high polished and riveted.The seat is covered with the top quality, thick genuine leather. Hand tooled and laced.Quality of this seat is second to none. No shortcuts were taken in the manufacturing process.Polished mounting hardware is included.
Seat measures: 16" long. 12" wide. 7" rear mounts distance. Front mount is adjustable.
Custom Seat on one of the Demon's Bobbers
Learn More
Solo seat by La Rosa on Harley-Davidson -
12" Rise Black Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers W/ Cruise Control 1996-07 Motorcycles
$555.55Black 12" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome SwitchesFor Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2007
This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.11/16" Bore master cylinder. For dual disc application.
with radio controls and cruise controlThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Retail $402.99----------------------------------------------------------------
Black 'El Diablo' Swedged Apehangers
12" Rise 1-1/4" Handlebars for Bagggers/Dressers
Show Black!
12" rise. 11" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
37" wide from tip to tip.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn More
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
14" Rise Black Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers With Cruise Control 1996-07 Motorcycles
$555.55Black 14" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome Switches W/ Cruise CrontrolFor Harley-Davidson Touring (Dresser / Bagger) models with Cruise Control from 1996 to 2007
This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.11/16" Bore master cylinder. For dual disc application.
with radio controls and cruise controlThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Retail $402.99----------------------------------------------------------------
Black 'El Diablo' Swedged Apehangers
14" Rise 1-1/4" Handlebars for Bagggers/Dressers
Show Black!
14" rise. 11" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
37" wide from tip to tip.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
16" Rise Black Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers With Cruise Control 1996-07 Motorcycles
$555.55Black 16" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome SwitchesFor Harley-Davidson Touring (Dresser / Bagger) models from 1996 to 2007
This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.11/16" Bore master cylinder. For dual disc application.
with radio controls and cruise controlThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Retail $402.99----------------------------------------------------------------
Black 'El Diablo' Swedged Apehangers
16" Rise 1-1/4" Handlebars for Bagggers/Dressers
Show Black!
16" rise. 11" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
37" wide from tip to tip.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality chrome switches for Dresser hand controls with radio control and cruise control.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Black 18" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars With Switches for Harley Motorcycles
$274.99"EL DIABLO" BLACK UNIVERSAL APEHANGERS
18" Rise 1-1/4" Handlebars
To fit Harley-Davidson FLST, FXST and any custom application.Powder coated black!
18" rise. 8" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.Flat Black
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
SOFTAIL FORWARD CONTROLS 4 HARLEY DAVIDSON MOTORCYCLES DUECE BLACK 36-99
$245.00BLACK BILLET FORWARD CONTROL KIT
4 Rubber Bands
Real craftsmanship shows all through this perfectly black powdercoated kit.
5/8" Bore billet forward control kit with pegs and Master cylinder.
Stock length.
Rear brake and shifter For Harley-Davidson Big Twin models 1936 - 1999 (except Dyna)
and Custom Choppers.CNC machined out of aircraft quality 6061-T6 aluminum.Made In USA
Learn More
-
SOFTAIL FORWARD CONTROLS 4 HARLEY DAVIDSON MOTORCYCLES BLACK 2000 UP BLK
$245.00BLACK BILLET FORWARD CONTROL KIT
4 Rubber Bands
Real craftsmanship shows all through this perfectly black powdercoated kit.
5/8" Bore billet forward control kit with pegs and Master cylinder.
Stock length.
Rear brake and shifter For Harley-Davidson Big Twin models 2000- Present (except Dyna)
and Custom Choppers.CNC machined out of aircraft quality 6061-T6 aluminum.MADE IN USA
Learn More
-
SOFTAIL CHROME FORWARD CONTROLS 4 HARLEY DAVIDSON MOTORCYCLES HD 2000 UP
$240.00CHROME BILLET FORWARD CONTROL KIT
4 Rubber Bands
Real craftsmanship shows all through this triple plated chrome kit.
5/8" Bore billet forward control kit with pegs and Master cylinder.
Stock length.
Rear brake and shifter For Harley-Davidson Big Twin models 2000- Present (except Dyna)
and Custom Choppers.CNC machined out of aircraft quality 6061-T6 aluminum.MADE IN USA
Learn More -
12" Rise Black Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers 1996-07 Motorcycles
$499.99Black 12" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Chrome SwitchesFor Harley-Davidson Touring (Dresser / Bagger) models from 1996 to 2007
This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.11/16" Bore master cylinder. For dual disc application.
with radio controls and NO cruise control(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Retail $402.99----------------------------------------------------------------
Black 'El Diablo' Swedged Apehangers
12" Rise 1-1/4" Handlebars for Bagggers/Dressers
Show Black!
12" rise. 11" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
37" wide from tip to tip.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality chrome switches for Dresser hand controls with radio control and NO cruise control.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
